NEC POWERMATE V Service Manual

Also see for POWERMATE: Service manual Manual Manual Manual Manual

Contents

Option Installation 3-296. Secure the device to the bracket with the four screws, two to a side, that comewith the device (see Figure 3-28).Figure 3-28 Securing a 3 1/2-Inch Drive7. Connect the drive cables.8. Replace the desktop 3 1/2-inch drive bracket (see Replacing the Desktop3 1/2-Inch Drive Bracket).Removing the Desktop Front PanelRemove the desktop front panel only if installing a 5 1/4-inch device. The front panel doesnot need to be removed if installing a 3 1/2-inch hard disk drive.If installing a 3 1/2-inch hard disk drive, see Installing the Desktop 3 1/2-Inch Drive.1. Remove the system unit cover as previously described.2. Remove the front panel by releasing the four tabs from the back of the front panel(see Figure 3-29).