2-20 Setup and OperationBoot OptionsThe system requires a Supervisor password to set Boot parameters. Select “Boot Options”directly from the Main Menu summary window to display the “Boot Options” menu.Use the legend keys to make the selections and exit to the Main Menu. Use Table 2-5 toselect the boot options.Table 2-5 Boot ParametersParameters Options DescriptionSummary Screen Enabled (default)DisabledDisplays system configuration at the end of boot-up.Floppy Check Enabled (default)DisabledVerifies diskette type during boot-up. Disablingspeeds up boot time.Last Boot Fail 3 (default)User-selectable settingsDisabledSets the number of times for user to boot system.If system fails to boot on number of tries, the"Previous Boot Incomplete" message appearsand the system boots with default settings.The default setting, 3, give the user three tries toboot the system before the "Previous BootIncomplete" message" appears.NumlockSelect “Numlock” directly from the Main Menu summary window to display the KeyboardFeatures menu.Use the legend keys to make the selections and exit to the Main Menu. Use Table 2-6 toconfigure the keyboard parameters.Table 2-6 Numlock ParametersParameters Options DescriptionNumlock Auto (default)OnOffOn or Off turns NumLock on or off at bootup.Auto turns NumLock on if it finds a numeric keypad.Keyboard Auto-Repeat rateFast (default)MediumSlowSelects key repeat rate.Keyboard Auto-Repeat delay1/4 sec1/2 sec (default)3/4 sec1 secSets the delay time after the key is held downbefore it begins to repeat the keystroke.Key Click EnabledDisabled (default)Turns audible key click on or off.
