Section 5Desktop RepairDISASSEMBLY AND REASSEMBLYThis section contains step-by-step disassembly procedures for the desktop systems. Thehard disk drive, and 3 1/2-inch diskette drive are installed and included in these disassemblyprocedures. Reassembly is the reverse of disassembly. Each procedure is supported by asimplified disassembly illustration to facilitate removal. The detailed exploded-view diagramand parts lists for the desktop systems are shown later in this section.A Phillips-head screwdriver is the only required tool. For complete disassembly of thesystem unit, follow the disassembly order listed in Table 5-1. To reassemble, follow thetable in reverse order.Individual removal procedures do not require the total disassembly of the computer. Eachof the following subsections lists the parts that must be removed before beginning theremoval procedure. To reassemble, follow the procedure in reverse order.Table 5-1 PowerMate V Desktop Disassembly SequenceSequence Part See Page1 System unit cover 5-22 Expansion board(s) 5-33 PCI/ISA backboard 5-54 3 1/2-inch diskette and hard disk drives 5-55 Front panel assembly 5-76 Blank panel 5-87 Speaker assembly 5-88 SIMM memory 5-99 5 1/4-inch devices 5-1010 Power supply 5-1111 System board 5-13
