Program20Program 20 : System Option Setup20-18 : Service Tone TimersLevelINDescriptionUse Program 20-18 : Service Tone Timers to set the values for the system service tone timers. Referto the following chart for a description of each option, its range and default setting.Input DataItemNo.Item Input Data Default Description Related PRG01 Extension Dial Tone Time 0~64800s 120 After getting Intercom dialtone, a telephone user hasthis time to dial the firstdigit of the Intercom call.02 Busy Tone Timer 0~64800s 1503 Congestion Tone 0~64800s 10 A Busy Tone when systemresources run short. (suchas DTMF receiverresources).04 Call Waiting Tone Timer 0~64800s 10 This option sets the timebetween Call Waitingtones. This timer also setsthe time between Off-HookSignaling alerts.05 Multiline ConfirmationTone0~64800s 1006 Interval of Call WaitingTone0~64800s 1007 Intrusion Tone RepeatTime0~64800s 0 After a call is interrupted(such as Barge-In, VoiceMail Conversation Record-ing, or Voice Over), thesystem repeats the Intru-sion Tone after this time.Normally, you should enter0 to disable this time.08 Conference Tone Interval 0~64800s 009 Warning Beep Tone Sig-naling Interval0~64800s 60 14-01-18ConditionsNoneFeature Cross ReferenceDistinctive Ringing, Tones, and Flash PatternsIssue 0.1SL1000Program 20 : System Option Setup2-166
