Program31Program 31 : Paging Setup31-03 : Internal Paging Group SettingsLevelINDescriptionUse Program 31-03 : Internal Paging Group Settings to assign names to Internal Paging Groups(i.e., Page Zones) and to define the splash tone for Internal Paging.The system shows the names you program on the telephone display. Use the following chart whenentering and editing text. When using the keypad digits, press the key once for the first character, twicefor the second character, etc. For example, to enter a C, press 2 three times. Press 2 six times todisplay the lower case letter.Key for Entering NamesWhen entering names in the procedures below, refer to this chart. Names can have up to 12 digits.When you want to . . .Use this keypad digit . . .1 Enter characters:2 Enter characters: A-C, a-c, 2.3 Enter characters: D-F, d-f, 3.4 Enter characters: G-I, g-i, 4.5 Enter characters: J-L, j-l, 5.6 Enter characters: M-O, m-o, 6.7 Enter characters: P-S, p-s, 7.8 Enter characters: T-V, t-v, 8.9 Enter characters: W-Z, w-z, 9.* Enter characters:Enter characters:# # = Accepts an entry (only required if two letters on the same key are needed - ex: TOM).Pressing # again = Space. (In system programming mode, use the right arrow soft key insteadto accept and/or add a space.)Clear the character entry one character at a time.Clear/BackClear all the entries from the point of the flashing cursor and to the right.FlashInput DataInternal Paging Group Number 01~32DefaultInput DataItemItem No.01 Internal Paging Group NameAssign name to Internal Paging Groups (i.e.,Page Zones). The system shows the nameyou program on the telephone display.Up to 12 Characters Refer to default table.02 Internal Paging Splash tone typeAllow an extension to have normal (0), muted(1) or no (2) Internal Paging alert beepsbefore a Paging announcement.0 = Ordinary volume1 = Mute2 = No tone0Issue 0.1SL1000Program 31 : Paging Setup2-296
