Program35Program 35 : SMDR Account Code Setup35-05 : Account Code SetupLevelINDescriptionUse Program 35-05 : Account Code Setup to set various Account Code options for an extensionClass of Service. Assign a Class of Service to extensions in Program 20-06.Input DataClass of Service Number 01~15tluafeDataDtupnImetI.oNmetI01 Account Code ModeUse this option to select the AccountCode Mode (0~3).0 = Account Codes Disabled (None)1 = Account Codes optional2 = Account Codes Required but not verified(No verify)3 = Account Codes Required and Verified(Verify)002 Forced Account Code Toll CallSetupUse this option enable AccountCodes for all calls or just toll calls (formode 2 or 3 in Item 01 above).0 = Account Codes for toll and local calls (All)1 = Account Codes just for toll calls (STD)003 Account Codes for Incoming CallsUse this option to allow users to enterAccount Codes for incoming calls. Ifdisabled, any codes entered dial outon the connected trunk.0 = Account Codes for incoming callsdisabled (No)1 = Account Codes for incoming calls enabled(Yes)004 Hiding Account CodesUse this option to either hide or showthe Account codes on a telephonedisplay.0 = Account Codes displayed1 = Account Codes not displayed0ConditionsNoneFeature Cross Reference• Account CodesIssue 0.1 SL1000Programming Manual 2-325
