Program22Program 22 : Incoming Call Setup22-14 : VRS Delayed Message for IRGLevelINDescriptionUse Program 22-14 : VRS Delayed Message for IRG (Incoming Group Ring) to define for eachincoming ring group the timers, VRS message number and type of tone for VRS Waiting Message.Input DataIncoming Ring Group Number 1~25Item No. Item Input Data Default01 1st Delayed Message Start TimeTime before the VRS Delay Message isplayed for IRG.0~64800 (sec) 002 1 st Delayed Message NumberVRS message that is used for the 1stDelayed Message.0~1010 = No Message101 = Fixed Message003 1 st Delayed Message Sending CountThis is the number of times the 1st DelayMessage is played. If set to 0, the 1stDelay Message is not played.0~255 (time) 004 2 nd Delayed Message NumberVRS message that is used for the 2ndDelayed Message.0~1010 = No Message101 = Fixed Message005 2 nd Delayed Message Sending CountThis is the number of times the 2nd DelayMessage is played. If set to 0, the 2ndDelay Message is not played.0~255 (time) 006 Tone Kind at Message IntervalWhat is heard between the DelayMessage.0 = Ring Back Tone1 = MOH Tone2 = BGM Source007 Disconnect Time After the End of VRSDelayed MessageTime, after all 2nd Delay Messages areplayed, before the caller is disconnected.0 = No Disconnect0~64800 Seconds60ConditionsNoneFeature Cross ReferenceNoneIssue 0.1 SL1000Programming Manual 2-239
