7. Plug the AC adapter into a standard 120 Vac wall outlet.Do not use an outlet controlled by a wall switch.Figure 2-132 Plugging the AC Adapter into the AC Wall Outlet6.1.6 Mounting the Base Directly to the WallIf a standard wall plate is not available, mount the telephone directly on the wall. Before mounting thetelephone, consider the following:• Select a location away from electrical cables, pipes, or other items behind the mounting location thatcould cause a hazard when inserting screws into the wall.• Make sure the wall material can support the weight of the base unit.• Use #10 screws with anchoring devices suitable for the wall material where the base unit will beplaced.To mount the telephone:1. Insert two mounting screws 3-15/16 inches apart. Allow about 3/16 of an inch between the walland screw heads for mounting the telephone.Figure 2-133 Inserting Screws into the Wall for Wall Mounting the Telephone2. Plug in and secure the AC adapter.3. Plug the AC adapter into the base unit.SL1100 ISSUE 5.02-92 Installation
