3. Make a note where you begin to hear noise on the line (the signal is getting weaker). The bestlocation for Repeater 2 is as far from Repeater 1 as possible while still maintaining a good signal.4. Repeat the process with Repeater 3, if necessary.6.3.5.4 Multiple Repeater SystemsYou can register up to six repeaters to one base as long as the repeaters are a minimum of 35 feetapart. Remember the signal can cross through walls and floors. Figure 2-160 Incorrect Installation onpage 2-112 illustrates repeaters that have been incorrectly installed.Figure 2-160 Incorrect InstallationFigure 2-161 Correct Repeater Installation on page 2-112 illustrates repeaters that have beencorrectly installed.Figure 2-161 Correct Repeater InstallationSL1100 ISSUE 5.02-112 Installation
