4. Place the spare battery (if available) in the back section of the charger; the BATTERY STATUSLED should turn on. (Pull the battery latch back slightly to fit the battery in the slot.) SeeFigure 2-168 Inserting Handset into the Charger on page 2-119.Figure 2-168 Inserting Handset into the ChargerCharge each battery completely (about 10 hours) before use.6.4.3.2 Powering on the HandsetTo power up the handset, press and hold End until the display flashes once (about 3 seconds). Thehandset searches for the base station or multi-cell chain it is registered to and connects to the unit withthe strongest signal.ISSUE 5.0 SL1100Hardware Manual 2-119
