Table 2-14 RJ-45 PRI Pin-Outs (S-Bus, T-Bus)Pin No. RJ-45 Cable Connector- PRI 1(J5) S-Bus ConnectionRJ-45 Cable Connector- PRI 1(J5) T-Bus Connection8 765 43211 TA RA2 TB RB3 - -4 RA TA5 RB TB6 - -7 - -8 - -3.4.5.2 Switch SettingThe following figure shows the location of the switches and LEDs on the IP4WW-1PRIU-C1 Card.1. Set the switches J6 to J9 according to the system, referring the Table 2-15 Switch Setting of1PRIU-C1 on page 2-55.Table 2-15 Switch Setting of 1PRIU-C1Switch No. Switch Position DescriptionJ6, J7 2M Connect PRI/E1 (2.048 Mb/s) line1.5M (default) Connect PRI/T1 (1.544 Mb/s) lineJ8, J9 T (default) T-Bus connectionS S-Bus connection2. Connect the cables from the NT1 Network Termination cable to the J5 connector on the 1PRIU-C1 Card.3. Assign whether the unit works as PRI/T1 by PRG10-51-01.With normal operation, D4 LED flashes green.ISSUE 5.0 SL1100Hardware Manual 2-55
