Chapter 4 - Terminals and Optional EquipmentChapter 4 4 - 434.14.3.1 Installing the ADA Adapter:1. Set the dip switch for recording: Position 1 and 6 ON, all others OFF.2. Unplug the keyset completely: line cord, LAN cable, and any power adapter which may beconnected to the keyset.3. Lower the legs of the keyset if they are raised.4. Remove the connector cover on the bottom of the keyset.Figure 4-20: REMOVE THE CONNECTOR COVERADA Dip SwitchesBit 1 Recording confirmation sent.On: OPIA path of terminal is opened.Off: OPIA path of terminal is closed.Bit 2 Not Used - Transformer used for voice input on or off.Bit 3 Used for voice inputting via a TRANS1. On: Used, Off: Not used.Bit 4 Relay Control.On: The relay is used for VOR recorder.Off: Relay does not work for ACD recording.Bit 5 Off: 600 Ohm, On: 30OhmBit 6 Reset when recording finished.Bit 7 On: Uses voice input from PC. Connects it with relay and analogswitch.Bit 8 UnusedCover
