Chapter 4 - Terminals and Optional EquipmentChapter 4 4 - 774.17.12 Using the Lock Feature on IP-CTS or Enhanced TerminalsThe Lock button on the IP-CTS or IP Enhanced terminals will provide a user with the ability to prevent calls ontheir terminal while away from their desk. This will prevent all calls from being dialed - including 911 (unlessallowed by changing the terminal’s setup (as defined above).1. Press the LOCK button at the top of the IP-CTS or IP Enhanced terminal.2. The screen displays “Security Lock?”. Press the OK Soft Key to enable or CANCEL to exit without settingthe feature.● The screen displays a screen saving while locked and the Lock LED will be lit.3. To clear the Lock feature, press any key. The screen request the password entry. Dial the 4-digitpassword for the terminal and press the OK Soft Key.● The terminal returns to an idle condition. If required, the UX5000 administrator can resetthe terminal if a password is forgotten.
