UNIVERGE SV8100 Issue 8.01VM8000 InMail 2 - 1641Checking MessagesIf Program 15-02-26 = 0 (Message Key):1. Press the Message key once. The user can use the VOL UP and VOL DOWN keys to view the new messages. If there are both voice mailmessages and Message Waiting calls, the display indicates the number of new voice mail messages and theneach Message Waiting call is shown. When there are new messages, the Message Waiting LED on the telephone will flash red. To return a displayed Message Waiting, press the Speaker key or lift the handset.2. To return a displayed Message Waiting, press Speaker or lift the handset.To listen to the voice messages, with Voice Message displayed, press Speaker or lift the handset. The voice mail is called. The voice mail is only called if there are new messages. If the display indicates Check Messages No Messages,press the Exit key to return the telephone to idle.If Program 15-02-26 = 1 (Voice Mail Key):1. Press the Message key once. The voice mail is called. When there are new messages, the Message Waiting LED on the telephone flashes red. With this option set, the MSG key can be used as a Voice Mail key for any function [calling voice mail or transfercall a to voice mail (Hold + MSG + Extension Number), etc.].Leaving A Message (multiline terminal Only)To leave a message in the mailbox of an unanswered extension (the extension you call can bebusy, in DND or unanswered):1. Press the Voice Mail key (Program 15-07 or SC 751: code 77 + VM8000 InMail pilot).- OR -Press the Message key on telephone, if equipped.- OR -Dial 8. The Voice Mail System prompts you to leave a message.
