UNIVERGE SV8100 Issue 8.01Licensing 2 - 865To request a recovery license, go to http://eip.necunified.com/Default.aspx and then go to the licenseportal and select the customer and the location of the CD-CP00-US. This can be done only once perCD-CP00-US.Conditions The recovery license can be used only once for each UNIVERGE SV8100 CD-CP00-US. When the recovery license is generated, it gives the date that the license ends (30 daysincludes the day generated). If the date is changed in Program 10-01-XX, while the license is in effect, to a date beforethe generated date it subtracts one day from the recovery license. If the date is changed in Program 10-01-XX, while the license is in effect, to a date after thegenerated date, it runs until the End Date specified when the License was generated. If the date is changed in Program 10-01-XX, while the license is in effect, to a date after theEnd Date specified when the License was generated, the system resets when it is applied(transfer key pressed), not when exiting program mode. When the System time turns to midnight of the End Date, the system resets and comesback with no licenses. The recovery license can be activated only from PCPro or WebPro, not a multiline terminal. If any CD-CP00-US license is activated when the recovery licensing is being used, theCD-CP00-US license resets with only the activated license(s).Temporary LicenseDescriptionWith Version 5000 or higher software, Temporary License activates all valid feature licenses and allport maximum licenses. Temporary License is programmed using Telephone programming only. Web/PC pro can be used when verifying the settings.The Temporary License can be set up to a maximum number of 10 days.Conditions When the number of days for the temporary license is assigned, system reset is requiredfor the license to take affect. When the number of the date is 0 (disable), the number can be set (1~10). When thenumber of the date is 1~10, the date can be set to 0 (disable) only.
