UNIVERGE SV8100 Issue 8.01Do Not Disturb 2 - 489Do Not DisturbDescriptionDo Not Disturb blocks incoming calls and Paging announcements. DND permits an extension user towork by the telephone undisturbed by incoming calls and announcements. The user can activate DNDwhile their telephone is idle or while on a call. Once activated, incoming trunk calls still flash the linekeys. The user may use the telephone in the normal manner for placing and processing calls.Five Do Not Disturb options are available at each extension. These options can be accessed viamultiline terminal Softkeys, DND feature key or DND system access code. 1 = Incoming trunk calls blocked. 2 = Paging, incoming Intercom, Call Forwards and transferred trunk calls blocked. 3 = All calls blocked. 4 = Incoming Call Forwards blocked. 0 = Do Not Disturb canceled.Multiline Line Terminals display the following to indicate the type of DND that is set. 1 = DND EXTERNAL 2 = DND INTERCOM 3 = DND ALL 4 = DND TRANSFERConditions Do Not Disturb access code is programmable via Program 11-11-08. If there is no Call Forwarding key (Program 15-07: 10~17), the DND key blinks when theextension is forwarded. Call Arrival (CAR) Key/ Virtual Extension (VE) do not support DND Programmable Functionkeys. Multiline terminal users can activate or deactivate Do Not Disturb while on a call. Thisoption is not available for single line telephones. When DND and Call Forward are set on the same telephone, call forwarding works. If Busyand No Answer Forwarding are set to different locations, it follows the Busy forwarding.
