E–9Slot for KensingtonMicroSaverSecurity SystemNOTE: Built-in Security Slot ( )This security slot supports the MicroSaver® Security System.MicroSaver® is a registered trademark of Kensington MicrowareInc.The logo is trademarked and owned by Kensington MicrowareInc.NOTE:When moving the projector or when it is not in use, coverthe lens with the lens cap.Using the protective lens padTo protect the Lens Shift mechanism, a hard polyurethaneprotective lens pad is attached to the lens.Before using the projector, remove the protective lens pad. Afteruse, reattach the protective lens pad.NOTE: Before reattaching the protective lens pad, be sure touse the shift lever to move the lens to the center position.Bottom / Side FeaturesLamp Cover ScrewAttaching the lens cap to the bottom with the sup-plied string and rivet1. Thread the string through the hole on the lens cap and thentie a knot in the string.Lens CapStringRivetLamp Cover2. Use the rivet to attach the string to the bottom.Notch for zoom leverSide view Front view
