NEC VT45 User Manual

Also see for VT45: Specifications Installation data Quick connect guide User manual User manual

Contents

NEC VT45 User Manual Manual pdf 20 page image

E–12Remote ControlOFF ONVIDEO S-VIDEO RGBPOWERPJMAGNIFYVOLUMEHELPSELECTEMNUT ERNENCEACLAUTO ADJ.FREEZE PIC-MUTE13457811146 9101512132171618Remote Control FeaturesNOTE: If you are using a Macintosh computer, you can clickeither the right-click or left-click button to activate the mouse.NOTE: If any one of the buttons is pressed and held for 60 sec-onds or more, the button operations will cease to operate. Thisis not a malfunction, rather it is a feature used to prolong batterypower. To cancel this feature, press any one of the buttons otherthan the SELECT button.1. Infrared TransmitterDirect the remote control toward the remote sensor on the pro-jector cabinet.2. LEDFlashes when any button is pressed.3. Power ON ButtonIf the main power is applied, you can use this button to turnyour projector on.4. Power OFF ButtonIf the main power is applied, you can use this button to turnyour projector off.NOTE: To turn off the projector, press and hold the POWEROFF button for a minimum of two seconds.5. VIDEO ButtonPress this button to select a video source from a VCR, DVDplayer, laser disc player or document camera.6. S-VIDEO ButtonPress this button to select an S-Video source from a VCR.7. RGB ButtonPress this button to select an RGB source from computer orcomponent equipment connected to your RGB port.8. Auto Adjust ButtonUse this button to adjust Position-H/V and Pixel Clock/Phasefor an optimal picture. Some signals may not be displayedcorrectly, or in some cases it may take some time for a sourceto switch between sources.9. Menu ButtonDisplays the menu.10. Select ( ) / (mouse) ButtonsWhen you are in the Computer mode, these buttons work as acomputer mouse.When you are in the Projector mode, which is indicated bylighting the PJ button:: Use these buttons to select the menu of the item youwish to adjust.: Use these buttons to change the level of a selectedmenu item.11. Enter (Left click) ButtonWhen you are in the Computer mode, this button works as themouse left button.When you are in the Projector mode, which is indicated bylighting the PJ button:Use this button to enter your menu selection. It works the sameway as the “Enter” button on the cabinet.12. CANCEL ButtonWhen you are in the Computer mode, this button works as themouse right button.When you are in the Projector mode, which is indicated bylighting the PJ button:Press this button to exit “Menus”. It works the same way asthe “Cancel “ button on the cabinet.13. PJ ButtonPress this button to switch the Select, Cancel, and Enter but-tons between the Projector mode (lit red)and the Computermode. Press this button or any one of the Power ON/OFFMenu, Help and Magnify buttons to switch to the Projectormode and the PJ button lights red. To switch back to the Com-puter mode, press the PJ button again.14. HELP ButtonProvides information about the current signal and the status ofthe projector.15. Magnify ButtonUse this button to adjust the image size up to 400%.16. Freeze ButtonThis button will freeze a picture. Press again to resume mo-tion.17. Picture Mute ButtonThis button turns off the image and sound for a short period oftime. Press again to restore the image and sound.18. Volume ButtonPress (+) to increase the volume and (–) to decrease it.NOTE: The default is the Computer mode, which allows you touse the Select, Cancel, and Enter buttons as your computer mouse.When the Power ON/OFF, MENU, HELP or MAGNIFY buttonis pressed, the PJ button lights red to indicate that you are in theProjector mode. If no buttons are pressed within 10 seconds, thelight goes out and the Projector mode is canceled.