NEO HS2128 E User Manual
                                        | |
Contents
| 
Chapter 4.0 Arming the System4.0 Arming the SystemThe PowerSeries Neo system can be armed using a keypad, a 2-way wireless key or a proximitytag.4.1 Arming the System (Infinite Exit Delay)In an attempt to reduce false alarms, your system is designed to notify you of an improper exit whenarming the system. When using the Push to Set, or Final Door Set feature, attempting to arm yoursystem will start an infinite exit delay. The keypad will sound a beep once per second. When youhave opened and closed the final exit door, or after pressing the Push to Set button, the exit delaywill be reduced to a programmable value, which is typically 10 seconds, after which the alarm willcomplete the setting. The panel used this time period to allow time for the detectors on the systemto return to their normal state. When this time expires, the system checks for detect-ors/windows/doors that may be open. If any of these are open, the panel will cancel the arming. Ifthis occurs, you must re-enter the premises, check the system, close any open zones, and thenattempt to arm again.4.2 Away Arming the System with the KeypadAway mode activates the complete alarm system by:l Arming all perimeter sensors.l Arming all interior sensors.To Arm the System in Away Mode LCD Display1. Ensure all windows and doors are closed and that the Readyindicator is on.Date TimeJAN 02/13 2:06a2. To arm using the Away key , press and hold the Awaykey for 2 seconds and, if required, enter your [access code] orpresent your proximity tag.ORTo Quick Arm the system press [*][0].System isReady to ArmthenPresent Tag orEnter Code3. If zones have been bypassed, ICN or LED keypads bypassLED will light and the bypassed zones #s will be shown.On an LCD keypad a warning appears.* Warning *Bypass Active4. After successfully initiating the arming sequence the:l Armed indicator turns on.l Ready indicator remains lit.l Exit Delay timer begins counting down.l Keypad beeps six times, continues beeping once per seconduntil beeping rapidly in the final ten seconds.l The system may be configured to have a persistent exitdelay that only ends when the exit door is opened andclosed, or when a button is pressed outside the protectedpremises.Exit Delay inProgress- 9 - |
manualsdatabase
Your AI-powered manual search engine