NEO HS2128 E User Manual
                                        | |
Contents
| 
Chapter 4.0 Arming the System4.5.1 Arming the System with a 2-Way Wireless KeyIf configured, the PowerSeries Neo system can be armed using the following wireless keys:l PG4929/PG8929/PG9929l PG4939/PG8939/PG9939To Arm the System with a 2-way wireless keyl Press the desired Arming mode button anytime the system Ready indicator is on.4.5.2 Arming the System with a Proximity TagDepending on how your keypad is programmed, proximity tags can be used to either arm/disarm thesystem or to perform a programmed function (e.g. unlock a cabinet or storeroom door).To Arm the System with a Proximity tagl Present your Proximity tag to a keypad equipped with a proximity sensor anytime the sys-tem Ready indicator is on.l If configured by your installer, enter your access code.4.6 Disarming the SystemDepending on your system configuration, there are multiple methods you can use to disarm your sys-tem. You can disarm the system using a:l 2-way wireless keyl Proximity tagTo Disarm the System with a Keypad1. Enter your [access code] or present your proximity tag anytime the system is armed .(Armed indicator is on).2. If you walk through the entry door, the keypad will beep. Disarm within _____ seconds toavoid an alarm condition.To Disarm the System with a 2-way Wireless Key1. Press the disarm button anytime the system is armed. (Armed indicator is on).2. If you walk through the entry door the keypad will beep. Press the disarm button within ____seconds to avoid an alarm condition.Note: After disarming a system with an HS2LCD keypad using a 2-way wireless key, alwayscheck the alarm memory to determine if any alarms have occurred during the armed period.To Disarm the System with a Proximity Tag1. Present your proximity tag to a keypad equipped with a proximity sensor anytime the systemis armed . (Armed indicator is on) and if configured as required, enter your access code.2. If you walk through the entry door the keypad will beep. Present your proximity tag within_____ seconds to avoid an alarm condition.Note: Duration of Entry timer is programmed by installer. The installer will advise the maximumduration of entry delay that was programmed in the system. It cannot exceed 45 seconds.4.6.1 Disarming ErrorIf your code is invalid, the system will not disarm and a 2-second error tone will sound. If thisoccurs, press [#] and re-enter your access code.- 11 - |
manualsdatabase
Your AI-powered manual search engine