NEO HS2128 E User Manual
                                        | |
Contents
| 
Chapter 6.0 Access Code Types6.2 Burglary VerificationThe Control Panel includes cross zone and sequential detection features that require a trip on two ormore zones within a given time period, to generate a confirmed alarm and immediate policeresponse.Note: Must be enabled and configured by installer.6.3 Swinger ShutdownThe Control Panel has a swinger shutdown feature that when enabled a programmable number oftrips shall shut down the zone. All burglary zone types have this feature enabled in CP-01 install-ations.Note: Must be enabled and configured by installer.6.4 Call WaitingThe Control Panel includes a programmable option for call waiting to prevent a call waiting linefrom interfering with the alarm verification process. This option is disabled by default.Note: Must be enabled and configured by installer.6.5 Fire Alarm VerificationFire Alarm Verification is an available option for Fire zones. If configured, once the conditions foralarm verification are met the fire alarm will sound and an alarm transmission will be sent to themonitoring station.Note: Must be enabled and configured by installer.6.6 System Lockout due to Invalid AttemptsIf too many invalid access codes are entered, your system can be configured to automatically lockout inputs from all keypads, wireless and proximity keys, and SMS commands for a specified dur-ation. When any keys are pressed, an error tone will sound. FMP keys are still active duringKeypad Lockout.Note: Feature and lockout duration must be configured by installer.6.7 User Labels (LCD keypads only)Adding or editing labels is done by using a pre-programmed word library. The following table lib-rary lists the full library and the associated three digit code.To Edit a User Label LCD Display1. From the applicable user, press [3] or use the scroll keys toscroll to User Labels and press [*].Press (*) for <>User Labels2. Press [*] [*] to enter word library.Program Name{User 1 Label 1}3. Use the scroll keys to scroll through the list of words or use the[3-digit number] to display the desired word. Press [*] toselect the word.4. To enter an additional word, repeat step 3.Press (*) for{User Label}- 15 - |
manualsdatabase
Your AI-powered manual search engine