NEO HS2128 E User Manual
                                        | |
Contents
| 
Chapter 4.0 Arming the System5. To cancel the arming sequence, enter your [access code] orpresent your proximity tag to the keypad reader.System DisarmedNo Alarm Memory6. Once the exit delay timer expires, thereby arming the system,the:l Ready indicator turns off.l Armed indicator remains on.l Keypad stops sounding.System Armedin Away ModeNote: The installer configures the exit delay timer and whether or not an access code is requiredfor arming the system.4.3 Exit Delay Time RestartThe control panel provides an option where, if a entry/exit zone is tripped a second time prior to theend of the exit delay, the exit delay time restarts. The exit delay timer can only be restarted once.4.4 Alarm Cancel WindowThe control panel provides a period of time in which the user can cancel the alarm transmission. Ifthe programmed alarm transmission delay has expired, canceling an alarm sends a message to themonitoring station. Upon a successful transmission of the cancellation message the keypad will beep6 times.Note: Must be enabled and configured by installer.Note: For CP-01 systems, alarm transmission delay must not exceed 45 seconds.4.5 Using 2-way Wireless Keys and Proximity Tags2-way wireless keys allow users in the close proximity of their house the ability to readily arm/dis-arm their system, and to call for help. For information on enrolling wireless keys see "User Labels(LCD keypads only)".671234552341 61. Away Arm2. Stay Arm3. Disarm4. Panic5. Command Output 16. Message LED7. Status LEDs1. Away Arm2. Stay Arm3. Disarm4. Panic5. Command Output 16. LEDNote: Panic feature has not been evaluated by UL. All wireless key buttons are programmable.Verify the functions assigned to each key with your installer. When using compatible wireless keysthere is one bell squawk for arming and two bell squawks for disarming.- 10 - |
manualsdatabase
Your AI-powered manual search engine