NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM5FEATURES AND FUNCTIONS# LABEL (LEDs) DESCRIPTIONPwr- indicates when power to ENVIROMUX is ON (solid ON) and when power failure hasoccurred (battery power is ON- LED is blinking once per second)Low Batt- indicates that the backup battery is running low on power, disconnected, or in failureCheck Log- illuminates when a new entry that is not an alert is added to the logInt Alert- illuminates when an internal sensor generates an alertExt Alert- illuminates when an external sensor generates an alertAux- Not used as of this printing1Fault- red — illuminates if a sensor goes out of range of a configurable threshold(ENVIROMUX-5D Only)See LED Status Chart (page 95) for more on LED indicators.# LABEL CONNECTOR DESCRIPTION2 SupportedUSB DevicesUSB Type A Female for connection of supported USB 1.1 compatible devices (USB modem or flashdrive for logging data)(see more information on pages 16 and 97)3 None None Opening for humidity sensor to sense4 AlarmTest/SilenceButton Used to test or silence the alarm connected to the siren terminals5 --- IEC Connector for connecting the power cable (see also “Dual Power Option” on page 19)6 --- Power Switch used to turn the power to the ENVIROMUX ON/OFF7 RJ45 Sensors RJ45 female connectors for attachment of various sensors8 Digital IN Terminal block connection block for wired sensors (2-to-4 wire)9 Output Relays Terminal block connection block for devices to be controlled in the event of alerts10 Console USB Type B femaleconnectorFor connecting USB cable for serial connection of a terminal to control thesystem11 RS232 (DCE) RJ45 female connector Alternative port for RS232 serial connection of a terminal to control the system12 Ethernet RJ45 female connectors for connection to a Local Area Network (LAN) for remote configuration,monitoring, and control13 Beacon Terminal block for two-wire connection of visual indication of alarm (page 12)14 Siren Terminal block for two-wire connections of audible indication of alarm (page 12)
