Napoleon Luxuria series Installation Manual

Also see for Luxuria Series: Owner's manual Owner's manual Installation manual Owner's manual

Contents

Napoleon Luxuria series Installation Manual Manual pdf 72 page image

W415-1710 / B / 08.17.18EN72finishingUnder normal conditions, there is no reason to remove the fixed side of the firebox glass door.Servicing can be completed from the access side.note:FIXED - SEE-THRU ONLYF. Remove GGA from fixed side.G. Remove the screws securing the door to the appliance.H. Tilt the top of the door forward, then lift it up and out of the bottom door retainer.I. When re-installing the door, lift onto the bottom door retainer, tilt the top towards the applianceand secure with the previously removed screws.12.8 media tray removalIt is recommended to only install media trays when using sand as media. Media trays, where supplied, shouldbe stored in the event it is planned to install alternate media at some point in the future.Natural gas models only: Media should be installed evenly across the burner tray but not directly on theburner ports themselves. Never place media directly on the burner ports as this can result in carboning or an un-appealing flame characteristic. For propane, refer to conversion kit.Propane models only: It is recommended not to install the sand pan media trays for propane applicationswith other media types (i.e glass). Not only will this provide a clean look to the appliance, but it also results in amore pleasing and clean burning flame. Media trays should be stored in the event it is planned to install alternatemedia at some point in the future.Media should be installed evenly across the burner tray and a moderate amountof media placed on the burner itself and, if necessary, adjusted to achieve a pleasing flame appearance. Neverplace excessive media on the burner as this can result in carboning or an unappealing flame charac-teristic. Never place media in the pilot housing or over the pilot. Always check that the appliance ignitessmoothly across the entire burner to ensure media does not compromise performance. Pay particular attentionwhen using power vents to ensure media placement does not affect ignition or flame characteristics.All models: Never place media in the pilot housing or over the pilot. Always check that the appliance ignitessmoothly across the entire burner to ensure media does not compromise performance. To install optional media,refer to instruction leaflet included with the media kit.12.9 optional media placement