Napoleon Luxuria series Installation Manual

Also see for Luxuria Series: Owner's manual Owner's manual Installation manual Owner's manual

Contents

Napoleon Luxuria series Installation Manual Manual pdf 73 page image

ENW415-1710 / B / 08.17.1873finishingEvenly spread the glass media onto the media tray. Ensure no glass media falls into the pilot opening. If thishappens, insert a clean bag into your vacuum cleaner and vacuum out the glass media.Replacement glass can be purchased from your local dealer / distributor.Cleaning Glass MediaGlass media may have a fine oil residue that needs to be cleaned prior to installation. Clean the glass with milddish soap, drain, rinse thoroughly and dry before placing over the burner.Removing MediaUsing a vacuum cleaner, use a clean bag and vacuum out the glass media.12.10 glass media installation / removal! WARNING• Clean the glass media prior to installation. Before applying the cleaned glass, ensure that it is dry.• If replacing, use only the replacement glass media available from your local authorized dealer / distributor.• Glass media over the burner ports will cause flame lifting and sooting problems.• Do not place any media (glass or vermiculite) in or around the pilot opening and/or on the burner ports. Thiswill interfere with the pilot operation.Pilot Area If media trays are not required, remove and installglass media for best flame and LED appearance.note:Do not use more media than what was supplied with the appliance. Do not place media directly onto the burner(NG models only).note:Natural gas illustrated.Do not place media directly over peaks, see “flame characteristics” section for more information.note:This appliance comes equipped with a media tray for sand over top the media tray withopening for use with all other types of media. Unless, installing sand media, remove the sandmedia trays.

/ 76

Related manuals for Napoleon Luxuria Series