Chapter 3 Register Map and DescriptionsPCI E Series RLPM3-12 ©National Instruments Corporation5-4 Reserved Reserved—Always write 0 to these bits (except for the6031E, 6033E, and 6071E).5–4 Bank<1..0> Bank Select 1 through 0—These bits indicate which sets ofresources are active for the current entry in the scan list.PCI-6031E, PCI-6033E and PCI-6071E segment thechannels into the banks of 16. Not every resource uses allof the bank bits. For example, PCI-6031E uses four banksof channels for the DIFF, NRSE and RSE resources, butonly one bank of CAL.3–0 Chan<3..0> Channel Select 3 through 0—These bits indicate whichchannel is active for the current resource in the scan list.Not every resource uses all 16 channels in a bank. Channelassignments for all PCI E Series or higher boards follow.Table 3-4. Calibration Channel AssignmentsChan Type<2..0> = CALChan<3..0> PGIA(+) PGIA(–) Purpose0000 AOGND 1 AOGND 1 ADC Offset0001 AOGND AIGND Ground Differential0010 2 DAC0OUT AOGND DAC 0 Offset/Linearity0011 2 DAC1OUT AOGND DAC 1 Offset/Linearity0100 REF5V 1 REF5V 1 ADC Offset0101 REF5V AI GND ADC Gain0110 2 DAC0OUT REF5V DAC 0 Gain0111 2 DAC1OUT REF5V DAC 1 Gain1000 2 DAC1OUT DAC1OUT —1001-1111 Reserved Reserved —1 AIGND on the PCI-MIO-16XE-50, PCI-MIO-16XE-10, PCI-6031E, PCI-6032E, and PCI-6033E2 Not valid for the PCI-6032E and PCI-6033E
