2-34 | ni.comChapter 2 Basic FunctionsCF24 Multichannel (VMCB) Domain Number ParameterSet the multichannel domain number. RMX models that have the same domain number performmultichannel operations. If you do not want to use the multichannel function, set this to 0 (thisis the factory default setting).If 5700 or DCS emulation is selected, you cannot use multichannel. This parameter is appliedwhen you turn the POWER switch off and on or when you execute CF34.CF25 Multichannel (VMCB) Channel NumberSet the multichannel channel number. Specify a unique number on the network. If you do notwant to use the multichannel function, set this to 0 (this is the factory default setting).If 5700 or DCS emulation is selected, you cannot use multichannel. This parameter is appliedwhen you turn the POWER switch off and on or when you execute CF34.CF30 to CF33 IP Address DisplayThese parameters display the set IP addresses. These parameters are only displayed when youare using the LAN interface.To set a fixed IP address use CONFIG parameters CF42 to CF45 and then apply the LANsettings with CF40. You can also set a fixed IP address when you access the power supplythrough a web browser. When you access the power supply through a web browser, do so underconditions in which a DHCP server or AUTO IP can be used.Value Parameter Description0 The multichannel function is not used (factory default setting).1 to 254 The domain number when the multichannel function is used.Value Parameter Description0 The RMX is used as a master unit on the multichannel network(factory default setting).1 to 30 1 to 30 The RMX is used as a slave unit with this channel numberon the multichannel network.Parameter Number Display DescriptionCF30 0 to 255 Displays the first IP address numberCF31 0 to 255 Displays the second IP address number
