1. Click and hold the Sound slot 3, which now contains the “Snare Ektl A 1.”2. While holding the mouse button, drag your mouse down. When the insertion line appearsabove the other snare, release the mouse button.→ Your first snare takes place above the second snare in the Sound slot 5. It will now betriggered by pad 5 on your controller.Keep in mind that any change in the Sound slot positions also affects the pads triggering the corre-sponding Sounds! Hence, it is recommended you practice with your new mapping to avoid confu-sion.3.3 Saving Your ProjectAgain, it is recommended to regularly save your work. You can then open another Project orclose MASCHINE and take a break. Your tutorial Project will be recalled as it was the next timeyou open it.To save your Project in the software:► Press [Ctrl] + [S] ([command] + [S] on macOS) to save your Project.To save your Project on the controller:► Press SHIFT + SAMPLING to save your Project.3.4 To Sum Up…In this tutorial, you have learned to:▪ Open a Project using the Browser (both on your controller and in the software).▪ Replace one of the Sounds from the original Group with another Sample taken from thefactory library using the Browser.▪ Replace one of the Sounds from the original Group with a Drumsynth.▪ Adjust the overall volume of MASCHINE along with the individual volume levels of yourGroups and Sounds using your controller.Building Your Own Drum KitSaving Your ProjectMASCHINE MIKRO - Getting Started - 53
