6.3 Modulating Effect ParametersOne of the really cool features of MASCHINE is the ability to modulate parameters from theControl area in a very easy way — both from the controller and in the software. Modulating aparameter means recording an offset to its value over time in order for these changes to beplayed back again automatically in your song. The modulation data is saved into the currentPattern. As an example, you could use this to create a filter sweep played in loop with yourPattern.Modulation is not limited to effects: In MASCHINE, you can modulate just about any parameter atthe Group or Sound level as soon as it has a continuous range of values — in other terms, almostany parameter controlled by a knob in the Parameter area!6.3.1 Recording ModulationNow try to record some simple modulation for the effect parameter of your choice.6.3.1.1 Recording Modulation in the MASCHINE SoftwareIf you take a closer look at the knobs in the Parameter area you will notice they have an outerring. This ring serves for recording modulation:► To record modulation, check that your song is playing, click the outer ring of the desiredknob and then drag it vertically.Recording modulation for a parameter.▪ You will note that the colored ring usually representing the current value of the parameterturned to a colored little dash. This dash follows the movements you just recorded.To remove modulation, do the following:Applying EffectsModulating Effect ParametersMASCHINE MIKRO - Getting Started - 98
