Nautel Vector-LP VR125 Technical Instruction Manual

Contents

Vector-LP Radio Beacon Transmitter Technical Instruction Manual Page 3-21Section 3 Operating Instructions Issue 1.1(a) From the main menu, highlight EventsLog (using and ) and press Select.The center soft-key permits viewing theEvents Log in two different modes – AllEvents or Alarms Only. For eithermode, a list of events is displayed, sortedchronologically, with a root-causedescription of the event.NOTERefer to Table 3-9 for a list of non-alarmevents that can be displayed on the EventsLog and a brief description of each. A list ofalarm events is available in Table 5-1.(b) Press or to scroll through theevents.(c) Press Select ### on a highlighted eventto display the transmitter status when thehighlighted event occurred. Use the Nextevent button to check the status ofsubsequent numbered events.NOTEThe 3-digit number shown in the Select ###display is the number allocated to thehighlighted event. Event 000 is the mostrecent occurrence.(d) To clear the history stored in the eventslog, press the and buttonssimultaneously.(e) Press Back to return to the main menu.3.6.6 Setting Real Time ClockSet the real-time clock as follows:NOTEThe real-time clock does not automaticallyupdate for Daylight Savings Time (DST).Table 3-9: Events Log Displays – Non-Alarm EventsNON-ALARM EVENTS(as displayed) DESCRIPTIONReturn to normal Transmitter alarms have cleared.Power up Transmitter has completed power up.12:43:16 Power: 0W Side A Bypass08Apr80 12:33:15 PS Module A1 Missing08Apr80 12:33:13 Return to normal08Apr80 12:33:13 Command Exciter B08Apr80 12:33:13 Low AC Voltage08Apr80 12:33:02 Power Up08Apr80 12:32:56 Mod. ProtectionSelect 000 Alarms Only Back12:43:16 Power: 0W Side A Bypass12:43:16 Power: 0W Side A Bypass08Apr80 12:33:15 PS Module A1 Missing08Apr80 12:33:13 Return to normal08Apr80 12:33:13 Command Exciter B08Apr80 12:33:13 Low AC Voltage08Apr80 12:33:02 Power Up08Apr80 12:32:56 Mod. ProtectionSelect 000 Alarms Only BackSelect Meters12:43:16 Power: 0W Side A BypassMain MenuChangeover ControlEvents LogSettingsPeripheralsRCMS SettingsVector NDBrev 1. 0. 4. 1Jul 27 200713:52:45NautelSelect Meters12:43:16 Power: 0W Side A Bypass12:43:16 Power: 0W Side A BypassMain MenuChangeover ControlEvents LogSettingsPeripheralsRCMS SettingsVector NDBrev 1. 0. 4. 1Jul 27 200713:52:45NautelMain Menu Select Back12:43:16 Power: 0W Side A BypassSettingsSet Real Time ClockMonitor SettingsMeter SettingsPower Source SelectConfigure SonalertMain Menu Select Back12:43:16 Power: 0W Side A Bypass12:43:16 Power: 0W Side A BypassSettingsSet Real Time ClockMonitor SettingsMeter SettingsPower Source SelectConfigure SonalertSet Real Time ClockUse up / down keys to select a value tochange. Press MODIFY to make changes.SET: Save changes to clock BACK: doneSet Modify Back12:43:16 Power: 0W Side A BypassTime Day Date14:30:29 Wed 08/Apr/80Set Real Time ClockUse up / down keys to select a value tochange. Press MODIFY to make changes.SET: Save changes to clock BACK: doneSet Modify Back12:43:16 Power: 0W Side A Bypass12:43:16 Power: 0W Side A BypassTime Day Date14:30:29 Wed 08/Apr/80