SafetyinformationProductinformationMechanicalinstallationElectricalinstallationGettingstartedBasicparametersRunningthe motor Optimization EtherCATinterfaceSD CardOperationOnboardPLCAdvancedparameters Diagnostics UL listinginformation208 Digitax HD M753 Control User GuideIssue Number: 312.14 Menu 13: Standard motion controllerFigure 12-33 Menu 13 logic diagramx(-1)0113.006Standard MotionReference Invert13.00713.008Ratio++01x(-1)0113.019Standard MotionRelativeJog Reverse13.018Standard MotionRelativeJog Enable13.017Standard MotionRelativeJog Referenceòò13.016Standard MotionPosition ErrorReset+_13.013Standard MotionOrientation PositionReferenced/dt13.004Standard MotionReference Source03.027P1 SpeedFeedback03.127P1 InterfaceP2 InterfaceP2 SpeedFeedbackOption Slot 1P1 Speed FeedbackOption Slot 1P2 Speed FeedbackOption Slot 2P1 Speed FeedbackOption Slot 2P2 Speed FeedbackOption Slot 3P1 Speed FeedbackOption Slot 3P2 Speed Feedback013245671013.023Standard MotionLocal ReferenceDisable1013.020 13.021 13.02213.024RevolutionsStandard MotionLocal ReferencePositionFinePositionStandard Motion IgnoreLocal Reference Revolutionsd/dt13.005Standard MotionFeedback Sourced/dtLimited to/ rev12±pole pitchor03.027P1 SpeedFeedback03.127P1 InterfaceP2 InterfaceP2 SpeedFeedbackOption Slot 1P1 Speed FeedbackOption Slot 1P2 Speed FeedbackOption Slot 2P1 Speed FeedbackOption Slot 2P2 Speed FeedbackOption Slot 3P1 Speed FeedbackOption Slot 3P2 Speed Feedback013245671003.080Sensorless PositionRFC-A / S only+_
