88General Camera SetupGeneral Camera SetupThe Setup MenuThe following settings can be changed in the setupmenu by selecting the z tab.Press the d button M z (setup) tab (A 10)Option Description AWelcome screenAllows you to select the image displayed as the welcomescreen when the camera is turned on. Select COOLPIX todisplay the COOLPIX logo. Select Select an image to use apicture taken with the camera as the welcome screen. Thewelcome screen is not displayed by default.E54Time zone and dateAllows you to set settings related to the camera’s date andtime. The Time zone setting allows you to specify the timezone where the camera is mainly used and whether or notdaylight saving time is in effect. When the traveldestination (x) is selected, the camera automaticallycalculates the time difference between the traveldestination and the home time zone (w), and savesimages using the date and time of the travel destination.E55Monitor settingsAllows you to adjust settings related to the monitor.• Photo info allows you to select the kind of informationthat is displayed during shooting mode and playbackmode. If you select Framing grid+auto info, a grid isdisplayed when shooting to help you frame the shot.• The Image review setting allows you to determinewhether or not the captured image is displayedimmediately after shooting.• Brightness allows you to adjust the brightness of themonitor.E58Print dateAllows you to imprint the shooting date and time onimages at the time of shooting. The default setting is Off.• The shooting date and time are not imprinted onpanorama images or movies.E60Vibration reductionAllows you to reduce blurring caused by camera shakewhen shooting. The default setting is Off.• When using a tripod to stabilize the camera duringshooting, set this feature to Off to prevent this featurefrom malfunctioning.E61S et upWelcome screenTime zone and dateM onitor settingsPr int dateM otion detec tionAF assistVibration reduc tion
