ooSettings that are freq uently used for P, S, A and M shooting modes can be savedin mode dial U.Rotating the mode dial to U enables you to shoot using the saved settings.The following settings can be saved in U.Basic SettingsShooting modes P/S/A/M Monitor display ([_Q14,1S)(Flashmode) (_34) _ (Focusmode) ([_Q38)2Zoom position (_29)[] (exposure compensation)(I]_41)Shooting menu=_= Image quality ([]]_75) :..'i| Image size ([]]_76) _ Optimize image ([]]_79)liB White balance (_82) 3 IS0 ISO sensitivity (_84) [] Metering ([]]_85)Continuous (_86) BI_" Auto bracketing (_89) [+] AF area mode (_90) 4I_ Autofocus mode ([]]_93) [] Flash exp. comp. ([]]_93) NR Noise reduction ([]]_94)Distortion control ([]]_94) "_'_ Active D-Lighting (_95)I The current flexible program (when set to P), shutter speed (when set to S and M) or aperture(when set to A and M) settings will be saved.2 The current focus distance will be saved when set to ME (manual focus).3 The preset value for preset manual applies to the P, S, A, i and U shooting modes.4 The current focus area position is saved when AF area mode is set to Manual.Clock batteryIf the internal clock battery (_ 156) is exhausted, the settings saved in U will be reset, Writing downg8 any important setting is recommended,