o7a706Rotating the zoom control to T (°0 during full-frame playbackmode (_32) zooms in on the current picture, enlarging anddisplaying the center of the picture on the monitor.• The guide at lower right shows which portion isenlarged.The following operations can be performed whilepictures are zoomed in.Use DescriptionZoomincreaseseachtime thezoomcontrolisZoom in T(O0 rotatedto T (O_),up to about10×.Zoomalso_!_y,,,_,_,_,_,_÷,_o_,,Zoom outMove the displayareaReturn to full-frameplayback _)Crop picture MENU[]Switch to shootingmodew (ll_)increasesby rotating the command dial to the right.Rotate the zoom control to W (_;_). When themagnification ratio reaches 1x, the displayreturns to full frame playback mode.Zoom also decreases by rotating thecommand dial to the left.Pressthe multi selector A, V, _ or • to movethe display area to other areas of the picture.Press the _) button.Press to crop the current picture to containonly the portion visible in the monitor.Press the [] button or the shutter releasebutton to change back to the last chosenshooting mode. Switching to shooting modecan also be performed by pressing the •movie record) button.1232,10112632Pictures Taken Using the Face-Priority FunctionWhen zooming in on a picture taken using the face-priorityfunction ([]_gl), the picture will be enlarged with the facedetected during shooting at the center of the monitor(except for pictures shot while Continuous ([]_86) orAuto bracketing ([_[_8g) was set).• If more than one face was detected, the picture will beenlarged with the face on which focus was acquired at the center of the monitor.Pressthe multi selector A, V, _, or i_ to display other faces that were detected.• When the zoom control is further rotated towards the i (c() or W (L'_) direction,the zoom ratio will change and will become a normal playback zoom display.