114Connecting to a ComputerConnecting to Televisions, Computers and PrintersB Notes on Power Source• When connecting the camera to a computer to transfer images, use a fully charged battery toprevent the camera from turning off unexpectedly.• When the camera is connected to a computer via the supplied USB cable with Auto (defaultsetting) selected for the Charge by computer option in the setup menu, the battery inserted intothe camera is automatically charged using power supplied by the computer (A 118, 139).• If the AC Adapter EH-62G (A 148) (available separately) is used, COOLPIX S2550 can be poweredfrom an electrical outlet. Do not use any other make or model of AC adapter as they may cause thecamera to overheat or malfunction.Transferring Images from a Camera to a Computer1 Start the computer to which ViewNX 2 was installed.2 Be sure that the camera is off.3 Connect the camera to the computer using the supplied USB cable.Be sure that connectors are properly oriented. Do not attempt to insert connectors at anangle, and do not use force when connecting or disconnecting the USB cable.The camera is automatically turned on and the power-onlamp will light. The camera monitor will remain off.B Connecting the USB CableThe connection may not be recognized if the camera is connected to the computer via a USB hub.
