32Basic Photography and Playback: A (Auto) ModeTaking Pictures with the Self-timerThe camera is equipped with a ten-second and two-second timer for self-portraits.This feature is useful for reducing the effects of camera shake that occurs whenpressing the shutter-release button.When using the self-timer, use of a tripod is recommended.1 Press the multi selector n (self-timer).The self-timer menu is displayed.2 Press the multi selector H or I to choose10 s or 2 s and press the k button.10 s (ten seconds): Use on important occasions, such asweddings2 s (two seconds): Use to prevent camera shakeThe mode selected for self-timer is displayed.If a setting is not applied by pressing the k button within a few seconds, the selectionwill be canceled.3 Frame the picture and press theshutter-release button halfway.Focus and exposure will be set.4 Press the shutter-release button therest of the way down.The self-timer starts, and the number ofseconds remaining before the shutter isreleased is displayed in the monitor. The self-timer lamp blinks while the timer is countingdown. About one second before the shutter isreleased, the lamp stops blinking and glowssteadily.When the shutter is released, the self-timer willbe set to OFF.To stop the timer before a picture is taken, pressthe shutter-release button again.S elf-timerF 3.2F 3.21 / 2 5 01 / 2 5 0101099F 3.2F 3.21 / 2 5 01 / 2 5 0
