120Connecting to a PrinterConnecting to Televisions, Computers and PrintersConnecting the Camera to a Printer1 Turn off the camera.2 Turn on the printer.Check printer settings.3 Connect the camera to the printer using the supplied USB cable.4 The camera is automatically turned on.When properly connected, the PictBridge startup screen(1) will be displayed in the camera monitor, followed bythe Print selection screen (2).B Connecting the USB CableWhen connecting the USB cable, be sure that the connectors are properly oriented. Do not use forcewhen connecting the USB cable. When disconnecting the USB cable, do not pull the connector at anangle.B If the PictBridge Screen is not DisplayedTurn off the camera and disconnect the USB cable. Set Charge by computer (A 139) in thecamera’s setup menu to Off, then connect the camera again.Pr int selec tion4N O . 42 0 1 11 5 / 0 51 2
