107Shooting Options: The Shooting MenuShooting, Playback and Setup MenusCamera Settings that Cannot Be Set at the Same TimeRestrictions apply to the following settings in A (auto) mode.Flash modeFlash turns off at Continuous settings of Continuous, BSS or Multi-shot 16.Applied setting is restored when Single or Intvl timer shooting is selected.Self-timerIf self-timer is on, only one shot will be taken when shutter is released, regardless ofsettings chosen for Continuous.Applied Continuous settings are restored when picture is taken or self-timer isturned off.ISO sensitivityWhen ISO sensitivity is set to 3200, Image mode cannot be set toh 3648×2736, i 3648×2736, L 2592×1944, P 3584×2016, ands 2736×2736. At these image size settings, selecting 3200 for ISO sensitivityautomatically switches the Image mode setting to M 2048×1536. When anyoption other than 3200 is next selected for ISO sensitivity, the original imagemode setting is restored.At an ISO sensitivity setting of 3200, the Multi-shot 16 option of the continuousshooting mode is not available. At a Continuous setting of Multi-shot 16,selecting 3200 for ISO sensitivity switches the Continuous setting to Single. TheSingle setting does not change even when ISO sensitivity is set to options otherthan 3200.ContinuousIf Continuous setting is set to Multi-shot 16, Image mode will be set to LNormal (2592).If Continuous mode is restored to any setting other than Multi-shot 16 thesettings for Image mode will also be restored.White balanceWhite balance is automatically set to Auto and cannot be adjusted when Black-and-white, Sepia or Cyanotype is selected for Color options.Applied white balance setting is restored when Standard color, Vivid color orPastel is selected.Distortion controlWhen Distortion control is set to On, Continuous will change to Single. Afterthat, if Distortion control is returned to Off, Continuous remains Single.