125Basic Camera Setup: The Setup MenuShooting, Playback and Setup Menusi Sound SettingsAdjust the following sound settings.k Auto OffWhen the camera is on and a period of time passes without any operations beendone, the camera will enter standby mode (A 15) to save power. Once in standbymode, the power lamp will blink, and if no operations are performed for anotherthree minutes the camera turns off. The time taken to enter standby mode can beset to 30 s, 1 m (default setting), 5 m, or 30 m.C Notes on Auto OffThe time allowed to elapse before the camera enters standby mode is fixed in the following cases:• While menus are displayed: 3 minutes• While slide show is in progress: Up to 30 minutes• While the AC adapter is connected: 30 minutesButton soundTurn button sound On or Off.When On (default setting) is selected, a beep will sound once when operations arecompleted successfully, two times when focus has been locked, and three timeswhen an error is detected, and welcome sound.Shutter soundChoose shutter sound from On (default setting) or Off.