82Connecting to a ComputerConnecting to Televisions, Computers and PrintersTransferring Pictures from a Camera to a Computer1 Start the computer to which Nikon Transfer was installed.2 Turn off the camera.3 Connect the camera to the computer using the supplied USB cable.4 Turn on the camera.The power-on lamp will light.Windows VistaWhen the AutoPlay dialog is displayed, click Copypictures to a folder on my computer using NikonTransfer. Nikon Transfer will start. To bypass this dialog in the future, check Always dothis for this device:.Windows XPWhen the AutoPlay dialog is displayed, click Nikon Transfer Copy pictures to afolder on my computer, and click OK. Nikon Transfer will start. To bypass this dialog inthe future, check Always use this program for this action..Mac OS XNikon Transfer will start automatically if Yes was selected in the Auto-Launch settingdialog when Nikon Transfer was first installed.B Connecting the USB Cable• When connecting the USB cable, be sure that the connectors are oriented correctly. Do not useforce when connecting the USB cable. When disconnecting the USB cable, do not pull theconnector at an angle.• Connection may not be recognized when the camera is connected to a computer via a USB hub.
