138Technical NotesError MessagesThe following table lists the error messages and other warnings displayed in themonitor, as well as the solutions for dealing with them.Display Problem Solution AO (blinks) Clock not set. Set clock. 117B Battery running low. Prepare to charge orchange battery.12NBattery exhausted.Battery exhausted. Charge or change battery. 12PBattery temperaturehighBattery temperature ishigh.Turn off camera, and allowbattery to cool downbefore resuming use. After5 seconds, this messagewill disappear, the monitorwill turn off, and thepower-on lamp and flashlamp will blink rapidly.After the lamps blink for 3minutes, the camera willturn off automatically, butyou can also press thepower switch to turn it offmanually.15Q (● blinks red) Camera cannot focus. • Refocus.• Use focus lock.24, 25104PPlease wait for thecamera to finishrecording.Camera cannot performother operations untilrecording is complete.Wait until message clearsfrom display automaticallywhen recording iscomplete.25NMemory card is writeprotected.Write-protect switch is in“lock” position.Slide write-protect switchto “write” position.19PThis card cannot beused.Error accessing memorycard.• Use approved card.• Check that connectorsare clean.• Confirm that memorycard is correctly inserted.1321818PThis card cannot beread.
