1443 Select a preset.Press the L (U) button and rotate the sub-command dialuntil the desired white balance preset (d-1 to d-6) is displayedin the monitor.4 Select direct measurement mode.Release the L (U) button brieflyand then press the button until theL icon in the monitor starts to flash.A spot white balance target (r) willbe displayed at the selected focuspoint.5 Position the target over a white or grey area.While L flashes in the display, usethe multi selector to position the rover a white or grey area of thesubject. To zoom the area around thetarget in for more precise positioning,press the X (T) button. You canalso measure white balance anywherein the frame by tapping your subject in the monitor, in whichcase there is no need to press the J or shutter-release buttonas described in Step 6.L (U) button Sub-commanddial
