222❚❚ Canceling BracketingTo cancel bracketing, press the BKT button and rotate the maincommand dial until no shots remain in the bracketing sequenceand the bracketing indicators in the control panel andviewfinder have turned off. The program last in effect will berestored the next time bracketing is activated. Bracketing canalso be cancelled by performing a two-button reset (0 206),although in this case the bracketing program will not berestored the next time bracketing is activated.A Zero ShotsThe live view display shows “–/–” when no shots remain in thebracketing sequence.A ADL BracketingIn continuous release modes (0 86), shooting will pause after thenumber of shots specified in the bracketing program have been taken.Shooting will resume the next time the shutter-release button ispressed. In self-timer mode, the camera will take one shot each timethe shutter-release button is pressed, regardless of the option selectedfor Custom Setting c3 (Self-timer) > Number of shots (0 263); theinterval between shots is however controlled by Custom Setting c3(Self-timer) > Interval between shots. In other modes, one shot willbe taken each time the shutter-release button is pressed.If the memory card fills before all shots in the sequence have beentaken, shooting can be resumed from the next shot in the sequenceafter the memory card has been replaced or shots have been deletedto make room on the memory card. If the camera is turned off beforeall shots in the sequence have been taken, bracketing will resume fromthe next shot in the sequence when the camera is turned on.
