ENGLISH USER MANUAL44 33019476(3)2010-02 A RS 2200SAFETY FUNCTIONSThe machine is equipped with the following safety functions:REVERSE GEAR BUZZERThe machine is equipped with a sensor and a buzzer to indicate that the machine is moving in reverse.SENSOR FOR ENGINE START-UP INHIBITION WHEN FORWARD/REVERSE GEAR SELECTOR ISENGAGEDThe machine is equipped with a sensor that does not allow for engine start up when the forward/reverse gear selector is out ofneutral position (centre).SAFETY SYSTEM THAT DOES NOT ALLOW FOR MACHINE START UP WHEN THE WORKING MODEIS SETThe machine is equipped with a safety system that does not allow for machine start up when the working mode is set, that is to saywhen the hydraulic system enabling switch is pressed.HOPPER BUZZERThe machine is equipped with a sensor and a buzzer to indicate that the hopper is lifting/lowering.LIFTED HOPPER SPEED LIMITATION SENSORThe machine is equipped with a sensor that limits the speed to 5 km/h if the hopper is not fully retracted.JOYSTICK SAFETY PUSH-BUTTONThe push-buttons on the joystick are active only if the safety push-button (on the joystick) is pressed.BATTERY MANUAL DISCONNECTIONThe machine is equipped with a manual battery release device to protect the machine when performing maintenance procedures onthe electrical system, when the machine is stored for long periods or when it is left unattended.TROUBLESHOOTINGThe following table shows the most common problems that may arise when using the machine, the possible causes and thesuggested remedies to solve them.WARNING!The suggested remedies must be performed by qualifi ed personnel, according to the instructions shown in thisManual, if present, otherwise contact a Nilfi sk Service Center, where it is possible to consult the Service Manual.For explanation or information, contact a Nilfisk Service Center.For troubleshooting the following optional equipment, refer to the relevant Manuals:Camera kit–
