Copyright © 2006 Nokia. All rights reserved.M e s s a g e s25Dial 2145551212, pause 5 seconds,press 1, pause 2 seconds, press1234, press #.Be precise; you will need thisinformation in “Setup voice mail withdialling codes”, p. 25.Insert dialling codesPress * repeatedly to cycle throughdialling codes. Once the desired codeappears in the display, pause brieflyand the code is inserted into thedialling string.The following dialling codes areavailable:*—Bypasses a set of instructions.p—Pauses for 2.5 seconds beforesending any numbers that follow.w—Waits for you to press the call keybefore sending the numbers or codesthat follow.Setup voice mail withdialling codes1. In standby mode, select Menu >Contacts > Speed dials.2. Scroll to an empty speed dial slotand select Assign.3. Enter your voice mailbox number,including the area code.4. Refer to dialling codes and enterany codes as necessary using theinformation that you wrote downfrom “Write down voice mailboxnumber and process”, p. 24.For example, if you pause for 5seconds after connecting to voicemail, enter p twice after the voicemailbox number, for example,2145551212pp.5. Enter any remaining pauses orother information that allows youto listen to your messages, andselect OK.6. Enter a name (such as Voice Mail),and select OK.To dial and listen to your voice mail,press and hold the assigned speed dialkey while in standby mode.If speed dialling is off, the phonedisplays a prompt asking if you wouldlike to turn it on.■ MinibrowsermessagesMinibrowser messaging is a networkservice. See “Network services”, p. viiifor more information.If your wireless service provider ornetwork operator supports this feature,you can check for e-mail messagesusing the minibrowser. In standbymode, select Menu > Messages >Minibrowser messages, and selectConnect.