To cancel all pairings, select Options > Delete all.Receive data using Bluetooth connectivityWhen you receive data through Bluetooth connectivity, atone sounds, and you are asked if you want to accept themessage. If you accept, is displayed, and the item isplaced in the Inbox folder in Messaging. Messages receivedthrough Bluetooth connectivity are indicated by .Block devicesSelect Menu > Settings and Connectivity > Bluetooth.To block a device from establishing a Bluetooth connectionto your device, open the Paired devices tab. Tap a device youwant to block, if it is not already highlighted, and selectOptions > Block.To unblock a device, open the Blocked devices tab, tap adevice, if it is not already highlighted, and select Options >Delete.To unblock all blocked devices, select Options > Deleteall.If you reject a pairing request from another device, you areasked if you want to block all future connection requests fromthis device. If you accept the query, the remote device isadded to the list of blocked devices.Remote SIM modeSelect Menu > Settings and Connectivity > Bluetooth.Before the remote SIM mode can be activated, the twodevices must be paired and the pairing initiated from theother device. When pairing, use a 16-digit passcode, and setthe other device as authorised.To use the remote SIM mode with a compatible car kitaccessory, activate Bluetooth connectivity, and enable theuse of the remote SIM mode with your device. Activate theremote SIM mode from the other device.When the remote SIM mode is on in your device, Remote SIMmode is displayed in the home screen. The connection to thewireless network is turned off, as indicated by in the signalstrength indicator area, and you cannot use SIM card servicesor features requiring cellular network coverage.When the wireless device is in the remote SIM mode, you canonly use a compatible connected accessory, such as a car kit,to make or receive calls. Your wireless device will not makeany calls while in this mode, except to the emergencynumbers programmed into your device. To make calls fromyour device, you must leave the remote SIM mode. If thedevice is locked, enter the lock code to unlock it.To leave the remote SIM mode, press the power key, andselect Exit remote SIM mode.USBSelect Menu > Settings and Connectivity > USB.Connectivity© 2008 Nokia. All rights reserved.76