M e s s a g i n g29Call and set up your voicemail1. After you save the voice mailbox, instandby mode, press and hold 1.2. When you connect to voice mailand the prerecorded greetingbegins, follow the automatedinstructions to set up your voicemail.Listen to your voice mailAfter you set up voice mail, you candial the number in one of four ways:• Dial the number using the keypad.• Press and hold 1.• Select Listen if there is anotification on the display.• In standby mode, select Menu >Messaging > Voice messages >Listen to voice messages.When you connect and theprerecorded greeting begins, followthe automated instructions to listen toyour voice messages.Automate voice mailVoice mail services vary by serviceprovider. The following instructions areexamples of common operations.Please check with your service providerfor specific instructions for using yourvoice mail service.Write down number andprocess1. Write down your voice mailboxnumber.2. Call and check your voice mail asyou normally would.3. Write down your interaction withthe recorded prompts step-by-step.Note that each voice mail servicemay vary. Your steps may resemblethe following:Dial 2145551212, pause 5 seconds,press 1, pause 2 seconds, press1234, and press *.Be precise; you will need thisinformation in “Set up voice mail withdialling codes”, p. 29.Set up voice mail with diallingcodes1. In standby mode, select Menu >Contacts > Speed dials.2. Scroll to an empty speed dials slot,and select Assign.3. Enter your voice mailbox number,including the area code.4. Refer to dialling codes, and enterany codes as necessary using theinformation that you saved from“Write down number and process”,p. 29.For example, if you pause for 5seconds after connecting to voicemail, enter p twice after the voice9244299_6265_en_au_oth.fm Page 29 Wednesday, October 26, 2005 11:07 AM