S e t t i n g s60Calling cardIf you use a calling card for longdistance calls, you can save the callingcard numbers in your phone. Yourphone can store up to four callingcards.Save information1. In standby mode, select Menu >Settings > Call > Calling card.2. Enter your security code or lockcode, and select OK. (See“Security”, p. 72.)3. Scroll to one of the four memorylocations, and select Options >Edit > OK > Dialing sequence.4. Select one of the followingsequence types:Access + phone + card—Dial theaccess number, the phone number,the card number and PIN, ifrequired.Access + card + phone—Dial theaccess number, the card numberand PIN, if required, then phonenumber.Prefix+ phone + card—Dial theprefix (numbers that must precedethe phone number) and phonenumber you want to dial, then cardnumber and PIN, if required.5. Enter the required information(access number or prefix and cardnumber), and select OK to confirmyour entries.6. Select Card name.7. Enter the card name, and select OK.Contact your calling card company formore information.Make callsAfter you have saved your calling cardinformation in your phone, you canmake a call using your calling card.1. In standby mode, select Menu >Settings > Call > Calling card.2. Enter your security code or lockcode, and select OK.3. Scroll to the calling card of yourchoice, and select OK.4. Press the end key to return tostandby mode; then enter thephone number, including any prefix(such as 0 or 1) that your callingcard may require when you make acalling card call. See your callingcard for instructions.5. Press and hold the call key for a fewseconds until Card call is displayed.6. When you hear the tone or systemmessage, select OK.9244299_6265_en_au_oth.fm Page 60 Wednesday, October 26, 2005 11:07 AM
