S e t t i n g s64DTMF tones are sent during an activecall. You can send them manually fromyour phone keypad, or send themautomatically by saving them in yourphone.Set typeIn standby mode, select Menu >Settings > Phone > DTMF tones >Manual DTMF tones and one of thefollowing:Continuous—The tone sounds for aslong as you press and hold a key.Fixed—Used to send tones of theduration you specify in the DTMF tonelength option.Off—Used to turn off tones. No tonesare sent when you press a key.Set lengthYou can also specify DTMF tone lengthwhen using the Fixed option.In standby mode, select Menu >Settings > Phone > DTMF tones >DTMF tone length > Short (0.1seconds) or Long (0.5 seconds).Start-up toneIf the Start-up tone is activated, thetone sounds when you turn on yourphone. In standby mode, selectMenu > Settings > Phone > Start-uptone > On or Off.Help text activationYour phone displays brief descriptionsfor most menu items. When you arriveat a feature or menu, pause for about15 seconds and wait for the help textto display. Scroll to page through thefull help text, if necessary.The default setting for help text is on.However, you can turn help text on oroff.In standby mode, select Menu >Settings > Phone > Help textactivation > On or Off.■ Voice commandsYou can set up to five Voice commands,which allow hands-free operation ofcertain phone features.Add a voice tagBefore using Voice commands, youmust first add a voice tag to the phonefunction.1. In standby mode, select Menu >Settings > Voice commands.2. Select a function option you wishto tag, and select Add.3. Select Start, and speak the voicetag clearly into the microphone.Do not select Quit unless you want tocancel the recording.9244299_6265_en_au_oth.fm Page 64 Wednesday, October 26, 2005 11:07 AM
