Nokia 6585 User Manual

Also see for 6585 - Cell Phone - CDMA2000 1X: Guide d'utilisation User guide Service manual User guide

Contents

Nokia 6585 User Manual Manual pdf 40 page image

Settings (Menu 4)36 Copyright © 2004 Nokia. All rights reserved.Note: For more information onconnectivity, refer to the PC/PDAConnectivity Guide. The PC/PDAConnectivity Guide can bedownloaded from the Nokiawebsite atwww.nokia-asia.com.1 At the start screen, select Menu >Settings > Call settings > Data/faxcalls > Incoming data/fax call >Normal, Data calls only, or Fax callsonly and press Select:Normal — The phone receivesincoming calls as usual.Data calls only — The phonereceives only data calls.Fax calls only — The phone receivesonly fax calls.2 When you are finished receiving thefax or data call, repeat Steps 1 and 2and select Normal.DATA TRANSFERYou can view the transmission speedwhen sending or receiving data or faxcalls.At the start screen, select Menu >Settings > Call settings > Data/fax calls> Data rate display > Graphic or Offand press Select.• PHONE SETTINGSSet the display language1 At the start screen, select Menu >Settings > Phone settings > Phonelanguage and press Select.2 Scroll to the language of your choiceand press Select.The language setting affects the time anddate formats of the clock, alarm clock,and calendar.Use automatic KeyguardYou can set the keypad of your phone tolock automatically after a preset timedelay (from 10 seconds to 60 minutes).1 At the start screen, select Menu >Settings > Phone settings >Automatic keyguard > On or Offand press Select.2 If you selected On, Set delayappears in the display.3 Enter the delay (in minutes andseconds) and press OK.Important: When keyguard is on,it may be possible to dial theemergency number programmedinto your phone. Key in theemergency number and press theTalk key. The number is displayedonly after you have keyed in itslast digit.DTMF tonesDTMF tones are the tones that sound whenyou press the keys on your phone’s keypad.You can use DTMF tones for manyautomated dial-up services such asbanking and airlines, or for entering yourvoice mailbox number and password.DTMF tones are sent during an active call.You can send them manually from yourphone’s keypad, or send themautomatically by saving them in yourphone.SET TYPE1 At the start screen, select Menu >Settings > Phone settings > DTMFtones > Manual DTMF tones andpress Select.2 Select one of the following optionsand press Select:Continuous — the tone sounds foras long as you press and hold a key.